5 Reasons Why Your Business Needs pvc corner protectors？

6 Difference Types and Importance of corner protectors

In a perfect world, the American trucker could pull his or her rig into the yard, hook up a trailer in mere minutes, and be on his or her way down the road. However, we do not live in a perfect world. Truckers are responsible for securing their own loads prior to departure. When truck tarps are used, part of securing a load is putting corner protectors in place.

RAITTO supply professional and honest service.

Corner and edge protectors can be a nuisance for a trucker on a tight schedule. Nevertheless, they provide valuable protection in a number of different ways. Corner protectors are used to protect:

Fragile or sensitive cargo

Webbing and straps

Tarp material.

Truckers always have to be aware of the loads they carry and any potential risks involved. They also need to be aware of the law. For example, any load in which friction between cargo and strap could cause abrasive damage to the strap is required to be secured with corner protectors. An accident resulting from a failure to use corner protectors could result in penalties to the trucker.

Of course, truck drivers also have a responsibility to the customers they serve. A sensitive load such as drywall or decorative brick is a prime candidate for corner protectors. The last thing the driver needs is to deliver a load with damage caused by unprotected corners.

different types of Corner Protectors

There are different types of corner protectors corresponding to the different kinds of loads the trucker might carry. Here is a list of the ones used most often:

1. V-Boards:

The most common type of corner protector is known as the V-board. This protector is nothing more than two flat surfaces joined at a 90° angle to provide cargo protection against straps. Most of the time these protectors are lightweight plastic. They offer inexpensive, easy-to-use protection for most loads.

2. Flexible Rubber

The flexible rubber corner protector is a small, rubber patch. It provides both cargo and webbing protection for loads in which 90° angles are not the norm. These are not recommended for use with chains.

3. Steel Protectors

Loads requiring the use of heavy chains need steel protectors designed with a divot or channel to keep the chain in place. There really is no substitute for this type of protector when chains are being used to secure a load.

4. Cardboard Edge Boards

Cardboard edge boards are just as popular as the plastic V-board. They are more suitable for fragile cargo and can be used to stabilize pallet loads as well. Best of all, they cost next to nothing.

5. Friction Pads

The friction pad is the ideal solution for coil loads. It lies between the coil and the tarp to reduce abrasion and stress. Friction pads can extend the life of steel tarps considerably.

6. Wear Sleeves

Your lumber tarps and cargo are not the only things needing protection. Your webbing straps also need to be taken care of with wear sleeves. Wear sleeves easily slip over the webbing to provide abrasion resistance. They are easily adjustable on the fly as well.

Corner protectors are cheap enough that the average trucker can keep plenty on hand at all times. At the same time, they provide important protection for cargo, truck tarps, straps, and chains. No trucker can do his or her job without them.

The 5 Best Childproofing Edge Guards

1

Best Overall Edge Guard

Roving Cove Baby Proofing Edge Corner Protector

Style: Edge & Corner | Material: Foam

REASONS TO BUY

Edges and corners

Long edge

Thicker foam

REASONS TO AVOID

Adhesive attachment

Edge & Corner |Foam

The Roving Cove Baby Proofing Edge Corner Protector is a simple edge and corner protection set. It includes 18 feet of foam edge guard and eight foam corner protectors. The foam has an adhesive backing that is easy to install and works well. It is available in 3 colors, and the foam is free of BPA, phthalates, heavy metals, latex, and SCCPs. We like that this product is doing one thing and doing it well.

Like all adhesive products, the adhesive can fail if not used correctly or is pulled on aggressively over time. However, this is true of any edge protection guards, as they are all adhesive installations. Overall, we like this edge guard, and corner protectors are easy to install and work well with no muss and no fuss.

The Roving Cove protector is a basic straight edge and corner protectors.The Roving Cove corner protectors are soft and thick enough to prevent most injuries.

2

Best on a Budget Edge Guard

Bebe Earth - Edge and corner guard Protector Set

Style: Edge & Corner | Material: Foam

REASONS TO BUY

Includes edge and corner

Easy installation

Includes door bumper

REASONS TO AVOID

Limited color

Edge & Corner |Foam

The Bebe Earth - Edge and Corner Guard Protector Set is a great budget-friendly set that includes 20 feet of edge protection, 8 corner protectors, and a door bumper. This set has the adhesive strip separate from the foam, so it can be applied to the surface before messing with the foam cover. The foam is compliant with US and EU child safety regulations and is BPA and phthalate-free should your little one decide to take a taste test. We like the look of this foam, the adorable cow door bumper, and the easy installation. This kit comes with the most straight-edge linear feet of foam in the group, making it a must-have for longer placements that require protection.

While the adhesive roll might be easier for some, we imagine others will be frustrated by the two-step process compared to the contenders where the adhesive comes attached to the foam. Also, while the edge guard is available in three colors, it looks like only the white option includes the cute door bumper, which is disappointing. Overall, we love this set, and even without the bumper, the longer foam with a reasonable price means you get more protection for your buck, which is a win in our opinion.

The Bebe Earth comes in three colors but only the white option has a door bumper.The Bebe Earth protectors have the adhesive already in place for a quick installation.

3

Best Corner Guard

Sure Basics corner guards

Style: Corner | Material: Foam

REASONS TO BUY

Easy to install

Thick foam

REASONS TO AVOID

Only corners

Corner |Foam

The Sure Basics Corner Guards is a pack of 8 corner guards in three sizes. The foam already has the adhesive backing on it as one piece, and they are thick enough to protect from just about any accidental bump or fall. These corner pieces are straightforward options for protecting little ones from sharp corners on furniture counters and more.

While we didn't experience it during testing, any adhesive can fail given the right circumstances. During installation, you should take special care and don't expect great results on heavily textured surfaces. That being said, we think these corner protectors are a helpful addition to any childproofing lineup where sharp corners are a concern.

If all you need are corner protectors, this Sure Basics set is a good go-to.The Sure Basics has attached adhesive that is wider than some of the competition.

4

Perfect for Fireplace Hearth

KidKusion Hearth Cushion

Style: Hearth | Material: Foam

REASONS TO BUY

Long

Heavily padded

Includes corners

REASONS TO AVOID

Won't work for all hearths

Hearth |Foam

The KidKusion Hearth Cushion is a product designed for hearth use providing edge and corner protection around fireplaces. The foam with this kit has a double-sided adhesive Velcro backing and is crinkle-free, closed-cell. This foam is made in the USA and free of BPA, phthalates, latex, and obvious odor. It comes in two colors, and the hearth-specific cushion has a semi-beveled edge that looks somewhat fancier than the rolled edge we see on most of the competing guards. The foam is easy to install and looks nice.

This edge protector is relatively thin compared to some of the competition, and it will only work in specific situations. We recommend measuring your space and checking your fireplace hearth for compatibility before purchasing to avoid disappointment. However, if it is the right selection for your home, it is a good choice for making hearths a safer place for little ones to stumble.

The Hearth protector from Kid Kushions is designed specifically for hearth protection.The adhesive for the Kids Kushion has separate adhesive you apply to the edge before you put the foam on.

5

Best Clear Corners

CalMyotis Corner Protector

Style: Corner | Material: Silicone

REASONS TO BUY

Clear

Less obvious

REASONS TO AVOID

Less cushion

Harder to remove

Corner |Silicone

The CalMyotis Corner Protectors are soft, clear pvc corner protectors. The protectors contain no phthalates, BPA, chemicals, or added toxic fire retardants. Each corner includes a clear, pre-installed adhesive that works well and installs easily (you may need a hairdryer to heat the glue). We like the look of these unobtrusive corner guards and think they are an excellent choice for those who need corner guards but aren't interested in the unsightly foam options.

Want more information on upvc skirting board cladding? Feel free to contact us.

These guards are thin and are not soft or squishy in the same way foam protectors traditionally are. So while you can avoid point-related injuries, it does not offer the same impact protection as a foam buffer. However, if aesthetics are your priority, these corner protectors have the potential to protect little ones from sharp corner-related injuries.

The adhesive component of the CalMyotis is separate from the clear corner guards.The CalMyotis have an unobtrusive look that doesn't distract from the beauty of the furniture itself.

6

Clear Ultra-small Corner Protection

Heelalbaby Safety Corner Protectors

Style: Corner | Material: Silicone

REASONS TO BUY

Two corner types

Understated

REASONS TO AVOID

Not very thick

Not very soft

Corner |Silicone

The Heelalbaby Safety Corner Protectors set includes 16 L-shaped and 8 ball shape corner guards. These guards are clear, non-toxic PVC to protect little ones from sharp corners. The collection has a stronger adhesive than previous versions and can be removed without leaving residue behind. We like that it comes with 8 additional adhesive strips if you need to move the guards or make a change. The protectors are somewhat flexible and soft. They are easy to install, and we like the look as it is less obvious than foam options.

Installation requires holding in place for a full minute. This process is longer than you think until you do it. They also are not soft, and while they can prevent stabbing injuries or breaking the skin, you can still get bumps and bruises with these guards. We think this contender could be a potential option for those who don't need significant protection and worry most about the overall aesthetic.

The Heelalbaby Safety Corner have corner ball protectors and traditional L shape options.The ball protector of the Heelalbaby corner protectors only protects the sharp point of the corner.

Bebe Earth is thin but still offers plenty of protection to potentially avoid serious injuries.

Credit: Abriah Wofford

Why You Should Trust Us

Senior Review Analyst and father of 7 Bob Wofford leads the edge guard review with extensive research on childproofing and edge protection. Bob is our go-to tester for most things 7 years running. The edge guards were selected with safety in mind and tested for ease of installation and how effective they were at getting the job done on various surfaces. Wendy Schmitz, Senior Review Editor BabyGearLab team member circa , rounds out the childproofing team with the test results analysis and review write-up.

Some kits have adhesive you apply yourself.We purchased each edge and corner protection for our review.

Analysis and Test Results

We tested 6 top competitors for edge guards in our childproofing conglomerate of testing. Each edge guard was assessed for ease of installation, potential longevity, and how well it worked, protecting little ones from possible injuries.

Safety First
While childproofing is essential to early parenthood, no childproof device is perfect. As with all types of childproofing products, you still need to keep a protective eye on little ones to avoid accidental injuries should the guards fail to withstand the rigors of toddlerhood.

The protectors with adhesive already attached are the easiest options to use in our opinion.

Credit: Abriah Wofford

Ease of Use

There isn't much to the edge guards beyond a peel-and-stick installation. No matter which variety you choose or what style, the majority boast a 3M adhesive backing that universally seemed to work well went the surface was prepared correctly. Attempting to attach any adhesive product to a dirty or heavily textured surface is bound to fail; otherwise, we didn't experience any trouble.

Other considerations would be cutting the edging to fit the desired location. While corner pieces do not need modifications, the longer edge parts will. Most of the products are designed to be cut to fit, and for the most part, we didn't have any trouble cutting the foam with ordinary scissors. The only real challenge is getting the adhesive backing off and the protector in the correct location. Once it sticks, that is it; even if you manage to pull it off to reposition, it won't securely attach a second time, and there will always be a "weak" area that refuses to stay put.

Any longer pieces of protection will typically require cutting the part to fit.

Credit: Abriah Wofford

We recommend you measure twice and cut once, then pull off the adhesive backing just a little bit at a time. This way, you won't accidentally create an un-sticky edge in your haste to finish what should be a simple, straightforward job but, in reality, requires more attention to detail. Corner pieces are easier to apply than longer edges, and the small silicone corner bumpers practically apply themselves. If you can solve your safety situation with just a single corner piece, save yourself the headache and stick with pre-created corners. Alternatively, if you have a longer edge, avoid using smaller pieces and always use a one-piece solution for safety and easier installation.

The clear corner guards might draw less attention from little ones and potentially be messed with less than the thicker more obvious foam.

Credit: Abriah Wofford

Efficacy

Using the products as directed in the right locations is very effective at preventing accidental injuries. Whether it is the sharp corner of a coffee table or the rock ledge of a fireplace, a tight-fitting edge guard can make all the difference between a nothing bump and a need for stitches. The two common ways edge guards can fail is an improper installation where the guard is not being used for its designed purpose, or it was installed without prepping the area properly, both of which can result in adhesive failure or unprotected areas and unintentional injuries.

Choking Hazard
Because many little ones find soft things mesmerizing, you might find your child chewing or picking at the foam guards. If this occurs, we strongly suggest replacing any damaged edging as soon as you see them, as the foam bits pose a potential choking hazard should children or babies ingest them on purpose or accidentally. Once again, adult supervision is mandatory for babies, even if you have effective childproof measures in place.

Because the foam guards are soft and squishy, they can be pulled on and the material picked at by little ones who may find them irresistible. While it didn't happen during our testing we can see how the foam could be a choking hazard if damaged.

Credit: Abriah Wofford

The second failure comes when kids spend time picking, pulling, or playing with the foam edging that acts as a magnet for some little ones who find the puffy foam irresistible, much like a moth to a flame. For this reason, we encourage parents to monitor little ones and redirect them to other activities should the bumpers become too intriguing. Preventing excessive play, picking, or pulling on the foam will increase the childproof device's longevity and decrease the chances of potential harm.

Protecting little ones from injuries related to falling or bumping into edges and corners is part of babyproofing parenthood responsibilities.

Credit: Abriah Wofford

Conclusion

Childproofing is not the fun part of parenthood, but it is necessary. Depending on your lifestyle and your child, you'll likely need to make an effort to utilize childproofing products, which can help you prevent potential injuries or death. Children on the move explore everything, and while nothing takes the place of adult supervision, any childproofing can be a huge help. Finding great edge guards and corner protectors can give you a leg up on keeping your little one safe from the potential head and eye injuries commonly sustained from falling into sharp edges and corners. We've tested many of the top-rated options to help you find the protection you need for almost any application and budget.

Childproofing is not the fun part of parenthood, but it is necessary. Depending on your lifestyle and your child, you'll likely need to make an effort to utilize childproofing products, which can help you prevent potential injuries or death. Children on the move explore everything, and while nothing takes the place of adult supervision, any childproofing can be a huge help. Finding great edge guards and corner protectors can give you a leg up on keeping your little one safe from the potential head and eye injuries commonly sustained from falling into sharp edges and corners. We've tested many of the top-rated options to help you find the protection you need for almost any application and budget.

The 7 Best Table Corner Protectors To Keep Your Teetering Toddler Safe

Finding the best corner table protectors may not be part of your ideal home decor vision, but it is a baby gear essential if you have an adventurous toddler. The day your baby starts moving around on their own is so exciting–and it’s also the time to begin baby-proofing your house with things like cabinet locks, outlet covers, furniture anchors, and of course, trusty table corner protectors. As babies are learning to crawl, stand up, and walk around, they’ll be super unsteady — not to mention, super unpredictable. You never know when and where they’re going to fall, where they’re going to go, or what they’re going to try to stand or climb on. And since you can’t be there to catch them every single time they tip over, your best bet is to try and prevent accidents (or at least, major ones). Table corner protectors are one of the best ways to ensure they don’t bang their little heads into the sharp corner of a table when they inevitably trip and fall.

Related: There’s No Avoiding It: Your Baby Wants A Bouncer. Give ‘Em One Of Our 12 Best Activity Centers.

When looking for the best table corner protector for your babe, the number one thing to keep in mind is safety; in other words, you want something cushioned enough to soften a possible blow. You should also opt for a material that’s safe if it ends up in Baby’s mouth, because your little one will almost definitely try chewing on these at some point. Keeping aesthetics in mind, pick a table corner protector that either blends into your furniture or is small enough to go almost unnoticed. Table corner protectors might not be the most attractive method of baby-proofing, but they are safe, and that matters more when little ones are around.

Check out some of the best table corner protectors out there to help prevent injuries and give you some peace of mind.

Best Table Corner Protectors For Baby

With over 13,000 positive ratings, these clear table corner protectors are a big hit on Amazon. They’re basically shaped like a clear bubble, so they’re subtle and will blend in with any color table, but they also cover up the entire corner, including both the top and the bottom edges. They use a high-powered adhesive that your little one will have trouble peeling off, and they’re made of a soft and flexible PVC material. They’ll fit on almost anything, and they are super versatile and easy to use.

One Reviewer Says: “These guys are large, they need to be if you want them to hold up against constant bumping. I have a 45-inch square coffee table that has to be covered with a glass top. When they delivered the top [it] was like an eighth of an inch too wide so it was an accident waiting to happen. I used these to cover the corners and we are constantly knocking into it and the bumpers not only stay on they help keep the glass top in place.”

These table corner protectors have over 21,000 positive reviews on Amazon, making them potentially the highest-rated option on the site. This set comes with both edge guards and corner guards so that you can cover up the edge of any table you’re concerned about, and not just the corners. It’s made of a durable, thick, and soft material that is super secure with minimal odor. You can choose to get them in a brown, black, or white color. They also use clean, raw materials, so if these do end up in baby’s mouth, you don’t have to worry too much.

One Reviewer Says: “These work great! Funny story, when I installed these to cover my fireplace brink corners I did so only to stop the nagging of my wife. BUT not 10 minutes after finishing the install did my son come up to the fireplace and trip falling head first into the foam-covered brick corner... THANK GOD I finally listened to my wife! Instead of a trip to the emergency room, he just bounced off of the foam and went about his business unharmed!”

These transparent corner protectors blend into any piece of furniture seamlessly and are very easy to put on. They stick really well, but also don’t leave behind a sticky residue. They are strong and durable, and they’re made with non-toxic materials with high-impact cushioning. Reviewers note that the adhesive is super sticky and these will last for months (at least).

One Reviewer Says: “I like getting products that do what they are intended to do. This product is a preventive measure so that wherever furniture may have rough corners that are potentially harmful the product not only softens the blow but appear to be durable enough to prevent any serious damage to skin or body. Often times we will childproof the home to keep a child from getting hurt on corners of furniture. Adults also can potentially get hurt in this way as well. This product was purchased for me to protect my person and my clothes from snagging. So far it works!”

These cushions have a soft yet firm design and are made to be used on any type of table, whether it’s made of glass or wood. They have a strong adhesive for easy installation, and they’re non-toxic.

One Reviewer Says: “I love these. They are super padded. We used them for the corners of our bed frame and I feel much better knowing they're there. They stick on well. They're not inconspicuous by any means. But it's worth it for me because of the protection they provide”

Looking for a corner guard that you can install quickly? Look no further. These guards are both child-proof and factory tested, meaning that you can leave your worries aside the second they arrive at your door. These have an adhesive on the back and are built to last — and come in a few different varieties to fit every type of corner you can think of.

One Reviewer Says: “We bought these because of our dog. We adopted a Rottweiler who is big and her head is the same height our glass kitchen table top and coffee table. She is always walking into the corners, not to mention the humans in the house too. The corners are really cushioned. I highly recommend these for people and pets.”

Best Glass Table Corner Protectors

If you have a glass table, you really want to keep your baby from bumping their head or any other part of their body on the sharp corners. These corner protectors were made with slim glass tables in mind, and they are small and thin to fit on the corners. They don’t use a sticky adhesive to stay on, but they are still pretty secure, and this also means that no residue will be left behind.

A slim profile and clear aesthetic make these corner protectors versatile to use on different furniture materials, including wood, marble, and glass; use one to soften the corner of a thin glass top, or two for a thicker surface that needs both top and bottom coverage. These are secured with a strong, transparent adhesive for easy installation, plus they won’t leave stickiness behind when it’s time to remove them. In addition to glass tabletops, customers say these protectors are perfect for furniture topped with glass protectors and glass cabinet corners.

One Reviewer Says: “These plastic protectors absolutely take care of sharp corners on glass tops and are perfect size for a 1/8 inch glass top. Believe these are the only ones that work for this size. Soft pliable and easy to apply. And you get a large box full to boot.”

This article was originally published on June 10,

When you’re running a business, it’s important to make sure that you have the right safeguards in place within your building to ensure smooth and safe operation. You may have overlooked just how important it is to protect the corners of your space from damage to prevent costly and time-consuming repairs. Unless your office, waiting room, display centre or facility is completely round – corner protection is an essential consideration for the busy workplace. 

Wall Corner Protection for Every Business

Wall corner protection offers a simple and effective solution to reduce the cost of your facility maintenance in both a short and long-term reality. Corner guards are long protective coverings made from PVC vinyl composite, rubber, or stainless steel, to fit flush on the wall where the two wall joins meet. This will generally form an impenetrable 90-degree angle that suits applications in many different businesses and facilities. 

Anti-bacterial Protection for Wall Corners

Corners are some of the highest zones of contact in your building, putting them at risk for both damage and bacteria. Carefully curated paint jobs, wood panelling, popcorn textured walls or cement walls can make these areas hard to clean and keep sanitised. With our anti-bacterial PVC vinyl composite, you will be able to manage flu season and keep the area looking clean and tidy with a simple wipe. 

Common industries that benefit from corner protection

• Hospitals
• Aged care facilities
• Medical centres
• Dentists
• Hospitality
• Science facilities
• Gyms and fitness
• Warehouses
• Shopping centres

Professionals who invest in Rootex products experience serious protection against trolleys, wheelchairs, carts, vehicles, and busy personnel. Our corner protection can be altered to suit your walls and corners perfectly, leaving no room for bacteria and no gaps for damage.

With options in both smooth and embossed PVC vinyl composite as well as rubber and stainless steel, you will experience anti-bacterial protection tailored to suit your kitchen, wet area, hallway, entrance ways, production areas and corridors.

Which corner protection is best for your walls?

From busy hospitals to pristine display centres – we have corner protection to suit every aesthetic and application. Our range is tailored to suit many different industries. With a custom installation process, we can create the perfect fit for your space. 

Our corner protection applications include:

• The Profila 50 & 30

These guards feature a 90-degree angle with a smooth finish, offering the benefit of being antibacterial and easy to wipe clean. A perfect option for hallways, waiting rooms and offices- this design comes in 32 different colourways to match your design perfectly. 

• The Protecta 2

Antibacterial and fire-rated PVC – this corner protection features a smooth finish and a solid colour to suit angles between 70 and 135 degrees. Another great choice for professional spaces, hallways and waiting rooms. 

• The Profil’inox 50 & 30

These corner guards offer strong protection for food-handling areas and wet zones in stainless steel for durability, style, and easy cleanliness. Available at a 90-degree angle, this adhesive brushed metal corner protector is an easy choice. 

• Safy Corner

These rubber padding corner guards offer a smooth surface and a 90-degree angle, available in 4 colours to cover up to 1.3 metres on your wall. These corner guards offer cushioning and protection for both the wall and your equipment. 

• SPM Capcorn

This corner protection provides a smooth finish and a 90-degree angle with an aluminium core, offering antibacterial qualities in fire-rated PVC. This all-rounder is available in 5 colours and is suited to a range of professional spaces, from offices to hospital corridors. 

• Cornea

The Cornea corner guards come with a constructed metal strip on an aluminium core, available in 31 standard colours. This corner protection is perfect for areas where safety is paramount such as factories, warehouses, and production areas. 

• Corneaflex

Like the Cornea product, the Corneaflex features a contrasting strip tape for easy visibility. With antibacterial qualities and fire-rated PVC, this corner protection is flexible to suit angles of up to 135 degrees. Additionally, we can cover variable angles with the Corneaflex available in two parts for customisation. In 5 standard colours, this flexible, smooth, antibacterial corner protection is the perfect solution for a range of high-risk areas. 

• Linea’flex

These flexible adhesive corner guards can suit angles between 80-150 degrees and are available in various colours in fire-rated PVC. Commonly used along the bottom of the wall or in combination with handrails, the Linea’flex has antibacterial qualities and can suit a range of spaces with walls of different lengths and angles.

Need corner protection for your walls?