10 Things to Consider When Buying Vibrating Grizzly Feeders for Sale

Thank You!

If you are looking for more details, kindly visit Shanbao.

Thank You for your valuable time. We have received your details and will get back to you shortly.

• A robustly constructed range of vibratory machines extending from units 0.5m widex2m long up to units 1.5mx4.5m.
• The grizzly feeders are intended primarily for use ahead of primary crushers are designed to handle large run-of-quarry stone, take the impact of dumped loads and smooth out the flow of materials to the crusher.
• All models of grizzly feeders have a flat reinforced impact area followed by a sloping grizzly bar section.
• The longer grizzly feeders are fitted with two stepped, grizzly bar sets. Replaceable wear sections of mild steel, manganese steel or rubber are fitted depending on the duty specified.

During material dewatering, water is filtered through the mesh as a result of vibration while the material is conveyed toward the point of discharge. The filtered water carries solid particles whose size is slightly smaller than the mesh openings, which must be recovered by means of hydrocycloning and incorporated to final product in the discharge area. The level of moisture that can be obtained in the end product is between 10% and 15%, depending on its nature, particle size distribution and water content in the feed materials.

The company is the world’s best Vibrating Grizzly Feeders for Sale supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

When the two vibrating motor that installed vertically on the sieve relatively rotate, the eccentric block of two vibrating motors produce rated excitation force. The horizontal excitation force cancel each other out, the vertical excitation force is transported to the whole screen surface through the body mass vibration. Materials do the jumping movement on the screen surface to the outlet because of the vertical excitation force. Materials which smaller than the mesh drop into the lower layer and discharge from the outlet after doing the jumping movement. Because of the reasonable screen, after vibrating screen, we can get materials of different concentration particle sizes and done the rating work of materials.

Vibrating Grizzly feeders consist of vibrating frame, spring, vibrator, motor vibrating device and motor. The vibrator is made of two fixed eccentric shafts whose gears are jogged. When installation, the two gears must be jogged according to the sign. Through drive of the motor, the two eccentric shafts start rotating to produce a linear huge power which forces the feeders to vibrate. Through the vibration, the materials will slip and sling on the funnel, moving forward, when the materials pass the screening part, smaller parts will fall down, and avoiding the further crushing, so screening purpose can be reached.

• The Grizzly feeders are suitable to feed primary jaw crushers, selecting the large sizes which require primary crushing, the smaller sizes and any fines which must be eventually rejected.
• The Grizzly feeders consists of a very large vibrating body made of thick plate with inside lining of anti-abrasive plate. The Grizzly vibro feeders are driven by two or four vibrating motors. The vibro feeders(which may either be placed on a steel or concrete base) rests on spring.

The area needed for the Grizzly Bar Section may be calculated from the following empirical formula and tables. The resulting figure provides a guide to the Grizzly Feeders model required.

If you want to learn more, please visit our website vibrating grizzly feeder.

Grizzly Bar area (m2) = Tonnes per hour of under size 
Capacity/m2 A x Factor B x Factor C