Laser cutting machines are a capable and versatile class of numerically controlled machine tools. They are used in virtually all industries for high throughput, precision cutting, engraving, and marking—from home use cutting card/paper through to shipbuilding and heavy engineering. They apply well-collimated and tightly focused laser radiation to pierce or engrave materials, with CNC-controlled precision and high productivity. There are several types of lasers commonly used in laser cutting, each with its specific characteristics and applications making it apt for selected market niches.

HAVEN contains other products and information you need, so please check it out.

Four main types of laser are used in laser cutting equipment, with a huge range of powers, from a few mW to 100+ kW. A variety of emission wavelengths render them suitable for particular material types. There are also operational factors that make some types of lasers particularly well adapted to limited market sectors, with no solution being universal. Figure 1 shows the laser cutting process:

This article will discuss the 4 types of laser cutters, how they work, and their applications.

1. Fiber Lasers

Fiber lasers are used principally for cutting and engraving metallic parts. They offer several advantages over other types of lasers, making them a logical choice in industrial applications.

Fiber lasers get their name from the chemically doped optical fiber used to induce the lasing and deliver the energy to the cutting point. The laser source starts with a primer laser, usually a diode type, which injects a low-power beam into the fiber. This beam is then amplified within the optical fiber, which is doped with rare earth elements such as ytterbium (Yb) or erbium (Er). The doping process induces the fiber to act as a gain medium, amplifying the laser beam by cascading excitations/emissions.

Fiber lasers emit a wavelength in the near-infrared spectrum, around 1.06 μm. This wavelength is thoroughly absorbed by metals, making fiber lasers particularly well suited to cutting and engraving this class of materials, even the “problem” reflective metals. 

One of the particular advantages of fiber lasers is their exceptional beam quality. This beam quality determines the laser's ability to produce a highly focused application of radiation and therefore a smaller and more precise cut path and higher specific energy (energy per unit area). This also entails lower beam divergence, allowing cuts that open less with increased target thickness.

Fiber lasers are renowned for offering higher cutting speeds and productivity. This also contributes to lower power consumption, compared to other types of lasers. Fiber lasers are generally optimized for cutting metals, including stainless steel, carbon steel, aluminum, copper, brass, and various alloys. They are not as effective for cutting non-metallic materials like wood, acrylic, or plastics, which are more effectively cut with CO2 lasers. Fiber lasers with higher power levels can also process thicker metals effectively.

Fiber lasers possess an elegant, simple, and robust construction and a near-solid state characteristic. This results in suppressed maintenance requirements, relative to other laser classifications. The absence of mirrors and some of the more delicate focal components minimizes alignment issues, improves beam quality, and elevates life span. Some models are capable of providing tens of thousands of hours of use, before requiring significant maintenance.

Fiber lasers are, in many regards, the optimal choice for metal cutting/ablation and engraving tasks. Pivotal factors cementing their commercial viability include: delivering high throughput, outstanding precision, operational and power efficiency, and low maintenance. Their capabilities render them a preferred tool in diverse industries, including: automotive, aerospace, electronics, and manufacturing, in which precise and efficient metal processing is crucial.

For more information, see our guide on What is a Fiber Laser.

2. CO2 Lasers

Despite being the earliest commercially exploited devices, CO2 lasers remain very widely used in the sector. They benefit from lower CAPEX (though higher OPEX) and a high degree of material versatility/applicability. They’re particularly suited to processing non-metallic materials with moderate precision and efficiency. They are also considered viable in many metal-cutting applications. For metal processing, the absorption spectrum is adverse but various, widely used workarounds can facilitate better functionality.

CO2 lasers are gas excitation devices that use a mixture of carbon dioxide (CO2), nitrogen (N2), and helium (He) to produce the laser beam in an energy cascade sequence. The laser source typically consists of a xenon flash tube or similar, which is excited by an electric discharge to initiate the stimulated emission process. This process is characterized by three distinct energy transitions, only the last of which involves a photon emission. N2 molecules are raised to a higher energy state that they then transmit to the CO2 molecules, which emit photons as they lose their excision energy by impacting He atoms.

This class emits at around 10.6 μm, in the far-infrared spectrum. This wavelength is strongly absorbed by organic materials like wood, plastics, leather, various fabrics, paper, and some non-metallic composites, resulting in highly efficient, clean, and precise cutting.

They have a lower beam quality in comparison to fiber lasers, which means the laser beam is less focused. This is a byproduct of the relative optical complexity of the devices and is also intrinsic to the gas emission system. However, advancements in CO2 laser technology have improved beam quality over the long service lifetime of the technology. The beam typically generates a larger spot size and higher divergence than other systems, which can markedly affect the precision of cuts.

CO2 lasers are widely accepted because of their versatility, relatively low purchase cost, and higher power use per watt of cutting. They can be considerably slower in cutting thick metal materials than fiber lasers. For non-metallic materials, they can offer excellent cutting speed, making them suitable for intricate designs and a wide range of applications. CO2 lasers require more maintenance than fiber lasers, due to the presence of mirrors and other optical components in their design. Additionally, the primary laser source degrades with usage time. They need regular optical-system cleaning and delicate realignment to maintain performance.

Want more information on WC67Y Hydraulic Press Brake? Feel free to contact us.

3. Nd:YAG/Nd:YVO Lasers

Nd:YAG (neodymium-doped yttrium aluminum garnet) and Nd:YVO (neodymium-doped yttrium vanadate) lasers are fundamentally similar solid-state devices. Both emit in the near-infrared spectrum, differentiated by the medium within which the stimulated emission occurs. They are most applicable to cutting and marking of metals and a limited range of non-metals.

Nd:YAG and Nd:YVO lasers are closely related solid-state laser devices doped with neodymium ions. In Nd:YAG lasers, the laser medium is yttrium aluminum garnet crystals doped with neodymium ions. In Nd:YVO lasers, the laser medium is yttrium vanadate crystals similarly doped with neodymium ions. When optically pumped (by a laser or discharge source), the neodymium ions become excited. This leads to the emission of laser light, as they lose the excitation energy.

These lasers emit at a wavelength of 1.064 μm, while Nd:YVO lasers emit at either 1.064 μm or 1.34 μm, differentiated by the crystal orientation. These wavelengths are in the near-infrared range and are well-absorbed by many metals, making these lasers suitable for metal cutting, engraving, and marking applications. Neodymium lasers generally possess high beam quality, low divergence, and a small spot size resulting in high specific energy.

Nd:YAG and Nd:YVO lasers are effective for cutting and processing metals, especially thin sheets and high-precision and lower gauge materials. They are best used for metals, including the more “reflective” materials: stainless steel, carbon steel, aluminum, brass, and copper. They are also suited to cutting ceramics, plastics, and certain composites—but they are poorly adapted to cutting other non-metallic materials. These laser types are well appreciated for their durability and relatively low maintenance requirements, improving up-time and commercial performance. They can provide thousands of hours of use before requiring major maintenance.

4. Direct Diode Lasers

Direct diode (or simply diode) lasers are a type of laser technology that utilizes single semiconductor junctions to generate laser light. They are increasing in market penetration in industrial applications, including: cutting, welding, and surface treatment. A direct diode laser is based on semiconductor junctions, typically made of gallium arsenide (GaAs). When a forward bias current is applied to the diode, it emits light by electroluminescence, without requiring a light source for initiation. The emitted light is then guided and focused into a laser beam by optical elements that make a stimulated emission resonant cavity with a half mirror at one end, through which the laser energy is emitted.

Diode lasers are available in a range of wavelengths, varied by the selection of the semiconductor material, dopants, and resonant cavity design. The most common wavelengths for direct diode lasers used in cutting applications are in the near-infrared spectrum, around 900 to 1,100 nm (0.9 to 1.1 μm). Alternate diode systems can emit in the blue and green wavelength ranges. The beam quality of direct diode lasers can vary considerably, though in general diode beam quality is improving with each device generation. Beam quality often does not match that of fiber lasers or CO2 lasers.

Diode lasers offer excellent energy efficiency by low loss conversion of electrical energy into laser light, reducing operating costs somewhat. However, their cutting speeds are generally lower than for fiber or CO2 laser-based devices, when material thicknesses are larger. Direct diode lasers are suitable for cutting a variety of materials, including metals, plastics, composites, and certain non-metallic materials. They are considered effective for high-speed cutting or welding of thin metal sheets, making them suitable for industries such as automotive, electronics, and sheet metal manufacture. This family of devices is simpler and more robust in construction than most other laser types, resulting in a longer operational life span and lower maintenance requirements. They are also of smaller physical size and require fewer ancillary devices, further enhancing maintenance and suitability for mobile applications.

Diode lasers are commonly used in Laser Heat Treating services.

Buyer's Guide: How to Choose Fiber Laser Cutting Machine

10% off Hurry! Offer Ends Soon! CODE: BESTMP10 COPY
CODE 50% off Laser Marking Spray | Offer Ends Soon! CODE: VIP50 COPY
CODE Boquirin Kim

In the ever-evolving landscape of metal engraving, how to choose fiber laser machine best fiber laser is essential. Fiber laser cutting machines have emerged as a dominant force. Renowned for their precision, speed, and efficiency, these machines offer unparalleled capabilities for diverse applications.. How to choose fiber laser machine in necessitates careful consideration of various factors to align perfectly with your project requirements. This comprehensive guide empowers you to navigate the fiber laser machine selection process and make an informed investment.

Machine Image Fiber Laser Model GPro Series MOPA GA Series MOPA GQ Series Machine GP Series Machine GI Series MOPA

Understanding Fiber Laser Machine

At the heart of a metal cutting laser lies the fiber laser source. This technology utilizes fiber optic cables doped with rare-earth elements to transmit and amplify a high-powered laser beam. Compared to traditional CO2 lasers, fiber lasers boast several advantages: they offer greater precision, faster cutting speeds, and enhanced efficiency, especially when cutting through metals. This makes them ideal for applications ranging from industrial manufacturing to intricate design work, ensuring clean, precise cuts in a variety of materials like stainless steel, aluminum, and brass, solidifying their place as some of the best fiber laser .

• Superior Beam Quality: Fiber lasers deliver a near-perfect beam quality. This translates to exceptionally narrow kerf widths (the width of the material removed during the cutting process) and the ability to achieve highly intricate cuts on various metals.
• High Cutting Speeds: Due to the focused nature of the beam, fiber lasers achieve significantly faster cutting speeds compared to other cutting methods. This translates to increased productivity and efficiency, particularly for high-volume metal processing.
• Metal Compatibility: Fiber lasers excel at cutting a wide range of metals, including:
  • Stainless Steel
  • Mild Steel
  • Aluminum
  • Copper
  • Brass
• Solid-State Design: Fiber lasers possess a simpler, more robust design with minimal moving parts. This leads to lower maintenance requirements and enhanced reliability compared to CO2 lasers.
• Broad Application Spectrum: Fiber laser cutting machines cater to various industries, including:

• Automotive: Creating precise components for vehicles.
• Aerospace: Manufacturing lightweight and high-strength parts for aircraft.
• Electronics: Fabricating intricate electronic components.
• Medical Devices: Producing delicate medical instruments.
• Jewelry & Signage: Engraving intricate designs and patterns.

How to choose fiber laser machine: Key Factors to Consider 

Selecting the optimal fiber laser cutting machine hinges on several crucial factors:

• Material Compatibility: Identify the primary metals you intend to cut. Fiber lasers are predominantly suited for metals; however, some models offer limited capabilities for specific non-metals.
• Laser Power: Laser power directly correlates with the thickness of metal the machine can effectively cut. Higher laser power enables processing of thicker materials but also influences the initial investment cost.
• Work Area Size: Consider the maximum dimensions of the metal sheets you plan to work with. Choose a machine with a work area that comfortably accommodates your project requirements.
• Cutting Speed and Precision: Evaluate the desired cutting speed and level of precision needed for your projects. Fiber lasers generally offer exceptional cutting speeds and precision; however, specific models may cater to varying levels of detail.
• Automation and Software: Explore features that enhance productivity and ease of use. Automation options such as automatic nesting (optimizing material usage) and user-friendly software interfaces can significantly reduce setup and operation times.
• Maintenance and Reliability: Assess the maintenance requirements of different models. Fiber lasers typically require less frequent maintenance compared to CO2 lasers.
• Cooling and Extraction: A proper cooling and exhaust system is vital for safe and efficient operation. Ensure the machine effectively removes fumes and debris during the cutting process.
• Budget: Carefully consider your budget and the initial investment required for each machine. While fiber laser technology generally carries a higher upfront cost compared to other cutting methods, the long-term benefits like faster processing times, lower maintenance requirements, and increased productivity can outweigh the initial investment.

Monport Fiber Laser Engravers: Powering Your Metal Laser Engraving Needs

Monport offers a diverse range of fiber laser cutting machines to cater to various project requirements and budgets, making them some of the best fiber laser options for both professionals and hobbyists.Their machines integrate MOPA technology, enabling superior performance and material marking capabilities. Here's a glimpse into some of their offerings:

• Monport GA Upgraded Fiber Laser Engravers: These integrated MOPA fiber laser engravers boast power outputs ranging from 20W to 100W. They feature autofocus functionality and are suitable for marking and precision cutting on various metals.

• Monport GPro Split MOPA Fiber Laser Engravers: This series offers split MOPA fiber laser engravers with power outputs ranging from 30W to 100W. They provide manual focus and cater to diverse metalworking applications.

• Monport GI Integrated MOPA Fiber Laser Engravers: These integrated MOPA fiber laser engravers come with electric lifting platforms for enhanced ease of use. Power options range from 20W to 60W, making them suitable for marking and intricate cutting on a wide range of metals.

• MONPORT GP Integrated Fiber Laser Engravers: This series offers integrated fiber laser engravers with electric lifting platforms. Power options include 20W, 30W, and 50W, ideal for engraving and light cutting applications.

• Monport Fiber Laser Engraver & Marking Machines: Monport also provides a selection of stand-alone fiber laser engravers with varying power outputs. These machines are suitable for marking and limited cutting tasks.

Additional Considerations

• Service and Support: Reliable after-sales service and technical support are crucial for ensuring the smooth operation of your fiber laser cutting machine. Choose a reputable manufacturer who offers comprehensive support services.
• Training and Resources: Explore the availability of training and resources provided by the manufacturer. This can help you optimize the use of your machine and achieve the desired results.

Conclusion

The Best Fiber laser machine  represent a revolutionary advancement in metalworking technology. By carefully considering the factors outlined in this guide and exploring the diverse options offered by reputable manufacturers like Monport Fiber Laser, you can select the ideal machine that aligns perfectly with your project requirements and budget.

Remember

Monport offers a comprehensive range of metal cutting lasers designed to cater to diverse needs. These machines provide varying power outputs and features, making them suitable for both small-scale projects and large-scale industrial applications. Key features include: best fiber laser technology, precision cutting, and efficient energy usage for a wide range of materials:

• High Precision: Fiber lasers produce incredibly accurate cuts, ensuring high-quality edges and minimal material wastage.
• Speed and Efficiency: Monport's fiber laser cutting machines boast fast cutting speeds, resulting in faster production times and increased efficiency for various metalworking projects.
• Versatility: With their ability to cut through different types of metals, fiber laser machines from Monport allow for versatile applications, from intricate designs in jewelry making to heavy-duty cutting in manufacturing.
• Customization Options: Depending on your needs, Monport's metal cutting lasers can be customized with varying laser power levels and work area sizes to meet specific production requirements.
• Cost-Effectiveness: Monport offers solutions for a range of budgets, making these high-performance metal cutting lasers accessible to hobbyists, small businesses, and larger industries alike.

Whether you’re in need of a metal cutting laser for precision engraving, fast cutting, or heavy-duty metalworking, Monport's machines are designed to meet and exceed your expectations, making them some of the best fiber laser options available.

Ready to upgrade your metal engraving and cutting? Don’t wait—get the best fiber laser technology now! Use code BESTMP10 at checkout – click here to shop! and transform your metalworking projects today with Monport’s cutting-edge fiber laser machines.